The RP173 Series are CMOS-based LDO regulators featuring 150 mA output and low supply current of Typ. 2.0 µA. RP173 Series are suitable for the power source such as the equipment being in the standby-mode. A version with CE input pin has reduced CE pull-up resistor to make its supply current ultra low.
The RP173 Series have Max. 11 V* Input voltage and are applicable to the portable communication equipment that require the 2-cell Li-ion battery. Also they are applicable to the non-portable communication equipments. As this series includes Reverse Current Protection Circuit, there is little leakage current, if it's used as back-up circuit. SOT-23-5 and SC-88A packages, a 1mm square DFN(PLP)1010-4 package are available.
*) Please check the condition
|Input Voltage Range||2.5 V to Set VOUT+6.5 V (Max.11 V)|
|Output Current||Typ. 150 mA|
|Supply Current||Typ. 2.0 µA|
|Standby Current||Typ. 0.2 µA|
|Output Voltage Range||1.2V to 5.5V (0.1V steps)|
|Dropout Voltage||Typ. 0.13V ( IOUT=30mA, VOUT=3.0V)
Typ. 0.90V ( IOUT=150mA, VOUT=3.0V)
|Output Voltage Accuracy||±1.0% (1.5V < VOUT ≤ 5.5V, Topt=25°C)|
|Line Regulation||Typ. 0.02%/V|
|Packages||DFN(PLP)1010-4, SC-88A, SOT-23-5|
|Short Current Limit||Typ. 45 mA|
|Protection Functions||Built-in Reverse Current Protection Circuit|
|Built-in Peak Current Limit Circuit|
|Output capacitors||0.1 µF or more|
RP173x30xx Dropout Voltage vs. Output Current
|3||CE or CE|
*) The tab is substrate level (GND).
|1||CE or CE|
*) Pin No. 2 is connected to the bottom of the IC. It is recommended that the pin be connected to the ground plane on the board, or otherwise be left floating so that there is no contact with other potentials.
|3||CE or CE|
PRODUCT LONGEVITY PROGRAM
RP173K and RP173N operate PRODUCT LONGEVITY PROGRAM.
This program has been introduced to help customers select the most appropriate part for applications that require long life cycles.
The output voltage, auto discharge function, package for the ICs can be selected at the user’s request.
|Product Name||Package||Quantity per Reel|
|Package *1||Marking||Reliability *2|
*1: The package file includes package dimensions, taping specifications, taping reels dimensions, power dissipations, and land pattern (foot pattern).
*2: Reliability file includes a reliability test report and a reflow profile.