Skip to main content Skip to first level navigation

RICOH imagine. change.

RICOH ELECTRONIC DEVICES CO., LTD.

Skip to main content First level navigation Menu
ricoh.com
Main content

RP901 Series
PWM/VFM Step-down DCDC Converter with Synchronous Rectifier Equipped with VR and VD

Product Specifications

The RP901 Series are CMOS-based PWM/VFM step-down DC/DC converters equipped with voltage regulator and voltage detector. The DC/DC converter can be selected from two control types - fixed PWM control or PWM/VFM auto switching control in which mode automatically switches to high-efficiency VFM mode in low output current.

RP901 was developed for applications that require multiple power supplies such as storage devices. It integrates an 800mA* (A/B/C Version) / 900mA* (D Version) output current step-down DC/DC converter, a 600mA output current LDO regulator, and a voltage detector with a built-in delay circuit into a small package. The regulator can be started after soft start of the DC/DC converter by sequence control. (A/B Version)

*) This is an approximate value, because output current depending on conditions and external parts.

FEATURES

Input Voltage Range (Maximum Rating) 4.5 V to 5.5 V (6.5V)
Supply Current Typ. 460 µA(at PWM mode)
Typ. 170 µA (at light load applied to B, C, D versions)
Standby Current Typ. 1 µA (A Version, CE="L")
Typ. 2 µA (B/C/D Version, CE="L")
Thermal shutdown circuit Detecting Temperature: Typ. 165°C,
Released temperature: Typ. 110°C
Package DFN(PLP)2527-10
External components CIN = 10.0 µF
COUT1 = 10.0 µF, L = 4.7 µH (DC/DC)
COUT2 = 2.2 µF (VR)
Step-down DC/DC Converter
Output Voltage Range 1.2 V to 1.8 V (0.1V steps)
Output Voltage Tolerance ±2%
Oscillator Frequency Typ. 1.2 MHz
Built-in driver ON resistance Typ. P-channel 0.25Ω, N-channel 0.25Ω (at VIN=5V)
Soft-start function Typ. 1 ms
Lx peak current limit function Typ. 1.4 A (D version: 1.5 A)
Output Current Min. 800 mA (D version: 900 mA)
Protection Delay Time Typ. 0.1 ms (applied to B, C, D versions)
UVLO function Typ. 3.5 V
Chip enable function "H" active
LDO Regulator
Output Voltage Range 2.5 V to 3.3 V (0.1V steps)
Output Voltage Tolerance ±1.0%
Output Current Min. 600 mA
Fold-back Protection Circuit Current limit Typ. 70mA
Start-up delay time Typ. 2 ms (applied to A, B versions)
Auto-Discharge function at turning off Discharge resistance Typ.50Ω (at VIN=5V)
VD
Voltage Detector Threshold Range 2.0 V to 3.0 V (A version: VR output voltage is supervised),
3.0 V to 5.0 V (B, C, D versions: Input voltage is supervised)
Detector Threshold Accuracy ±2%
Released Delay Time Typ. 50 ms

TYPICAL CHARACTERISTICS

Efficiency vs. Output Current

PIN DESCRIPTION

DFN(PLP)2527-102.5 mm × 2.7 mm

DFN(PLP)2527-10

1 CE
2 VDOUT
3 AGND**
4 PGND**
5 Lx
6 PVDD**
7 NC
8 VOUT1
9 AVDD**
10 VOUT2

*) The tab is substrate level (GND).
**) No.3 pin and No.4 pin, No.6 pin and No.9 pin must be wired each other when it is mounted on board.


RP901 Series for Consumer

APPLICATIONS

  • Optical Disk Equipment

SELECTION GUIDE

In the RP901 series, the output voltage combination and function can be designated.

Product Name   Package Quantity per Reel
RP901Kxxx#-TR Consumter DFN(PLP)2527−10 5,000
  • xxx … Serial number to describe the voltage combination of DC/DC converter, voltage regulator, and voltage detector.
  • # … Function version
A DC/DC control type is PWM-fixed, without protection delay time, output current Min. 800mA,
VR has start-up delay time to make a sequence.
VD supervises the output of VR (Reset is output at UVLO and over current of DC/DC)
B DC/DC control type is PWM/VFM automatic mode shift, with protection delay time, output current Min. 800mA,
VR has start-up delay time to make a sequence.
VD supervises the input voltage.
C DC/DC control type is PWM/VFM automatic mode shift, with protection delay time, output current Min. 800mA,
VR: without delay time to make a sequence,
VD supervises the input voltage.
D DC/DC control type is PWM/VFM automatic mode shift, with protection delay time, output current Min. 900mA,
VR: without delay time to make a sequence,
VD supervises the input voltage.

DOCUMENT/CONTACT

Purchase

Technical Support

Package *1 Marking Reliability *2
DFN(PLP)2527-10 RP901K RP901K

*1: The package file includes package dimensions, taping specifications, taping reels dimensions, power dissipations, and land pattern (foot pattern).
*2: Reliability file includes a reliability test report and a reflow profile.

Inquiry about products

Contact Us by Mail

Contact Us by Mail

Contact Form (SSL Form)

Contact Us by Phone

Contact Us by Phone

Contact Phone Number

Inquiry about purchase

Purchase, Request for Samples and Documents

Distributors

Sample Online

Online Distributors