Low Power/Fast MODE alternative 200mA LDO REGULATOR
The RP202x Series consist of CMOS-based voltage regulator ICs with high output voltage accuracy, low dropout voltage and low supply current. These ICs perform with the chip enable function and realize a standby mode with ultra low supply current. To prevent the destruction by over current, the current limit circuit is included. The RP202 Series have 3-mode. One is standby mode with CE pin. The other two are the fast response mode (Fast Mode) and the low power mode, and switch over automatically according to the load current of the LDO. Supply current of IC itself at light load is automatically reduced. The output voltage is maintained between Fast Mode and ECO Mode.
The RP202x consists of a voltage reference unit, an error amplifier, a resister net for voltage setting, and a current limit circuit.
Since the packages for these ICs are SOT-23-5, SC-88A, and DFN(PLP)1010-4, high density mounting of the ICs on boards is possible.
|Input Voltage Range||1.4V to 5.25V|
|Output Voltage Range||0.8V to 4.0V (0.1V steps)
(For other voltages, please refer to MARK INFORMATIONS.)
|Supply Current (IOUT=0mA)||Typ. 2.5μA|
|Supply Current (IOUT=10mA)||Typ. 50μA|
|Supply Current (Standby Mode)||Typ. 0.1μA|
|Dropout Voltage||Typ. 0.20V (IOUT=200mA, VOUT=2.8V)|
|Ripple Rejection||Typ. 70dB (f=1kHz, VOUT=2.8V, IOUT=30mA)|
|Line Regulation||Typ. 0.02%/V (IOUT=10mA)|
|Packages||DFN(PLP)1010-4, SC-88A, SOT-23-5|
|Built-in Foldback Protection Circuit||Typ. 60mA (Current at short mode)|
|Ceramic capacitors are recommended to be used with this IC||0.47μF or more|
- ・Power source for portable communication equipment.
- ・Power source for electrical appliances such as cameras, VCRs and camcorders.
- ・Power source for battery-powered equipment.
|Data Sheet||Flyer||Package Info.||Mark Info.||Quality
All PDF files are less than 1MB unless otherwise stated.
- Technical Support