0.8%ACCURACY 0.7V OUTPUT 400mA LDO REGULATOR
The RP106x Series are low voltage 400mA voltage regulator. These ICs had been further improved of low-voltage capability compared with previous low-voltage product.
The input voltage is as low as Min. 1.0V and the output voltage can be set from 0.7V. The output voltage accuracy has been improved to ±0.8% and due to a built-in transistor with low on-resistance of 0.55Ω (at VOUT=1.5V).
Each of these ICs consists of a voltage reference unit, an error amplifier, a resistor-net for voltage setting, and a current limit circuits for over-current for the destruction prevention by the over-current.
The CE pin can switch the regulator to standby mode. In addition to SOT-23-5 and SC-88A packages, a 0.69mm square WLCSP-4-P5 package and a 1.2mm square DFN(PLP)1212-6 are also available.
|Supply Current||Typ. 48μA|
|Standby Current||Typ. 0.1μA|
|Ripple Rejection||Typ. 60dB (f=10kHz)|
|Input Voltage Range||1.0V to 3.6V|
|Output Voltage Range||0.7V to 1.8V (0.1V steps)
(For other voltages, please refer to MARK INFORMATIONS.)
|Output Voltage Accuracy||±0.8% (VOUT>=1.0V, Topt=25°C)|
|Temperature-Drift Coefficient of Output Voltage||Typ. ±60ppm/°C|
|Dropout Voltage||Typ. 0.22V (VOUT=1.5V)|
|Line Regulation||Typ. 0.10%/V|
|Packages||WLCSP-4-P5, DFN(PLP)1212-6, SC-88A, SOT-23-5|
|Built-in Fold Back Protection Circuit||Typ. 110mA (Current at short mode)|
|Built-in Constant Slope Circuit|
|Ceramic capacitors are recommended to be used with this IC||1.0μF or more|
- ・Power source for portable communication equipment.
- ・Power source for electrical appliances such as cameras, VCRs and camcorders.
- ・Power source for battery-powered equipment.
|Data Sheet||Flyer||Package Info.||Mark Info.||Quality
All PDF files are less than 1MB unless otherwise stated.
- Technical Support