RP104x Series


Data Sheet / Flyer
Data Sheet * Flyer

We recommend succeeding product
"RP110x". ⇒Comparison List

The RP104x Series are CMOS-based voltage regulator ICs with high output voltage accuracy, extremely low supply current and low ON-resistance. Each of these ICs consists of a voltage reference unit, an error amplifier, resistor-net for voltage setting, a current limit circuit and a chip enable circuit.

These ICs perform with ultra low supply current (Typ.1.0µA), which prolong the battery life.

Since the packages for these ICs are DFN(PLP)1010-4, SOT-23-5 and SC-82AB, therefore high density mounting of the ICs on boards is possible.

Supply Current Typ. 1.0µA
(Except the current through CE pull down circuit)
Standby Current Typ. 0.1µA
Dropout Voltage Typ. 0.24V (IOUT=150mA, VOUT=2.8V)
Temperature-Drift Coefficient of Output Voltage Typ. ±40ppm/°C
Line Regulation Typ. 0.02%/V
Output Voltage Accuracy ±0.8%
Packages DFN(PLP)1010-4, SC-82AB, SOT-23-5
Input Voltage Range 1.7V to 5.25V
Output Voltage Range 1.2V to 3.3V (0.1V steps)
(For other voltages, please refer to MARK INFORMATIONS.)
Built-in Fold Back Protection Circuit Typ. 40mA (Current at short mode)
Ceramic capacitors are recommended to be used with this IC 0.1µF or more
  • Power source for portable communication equipment.
  • Power source for electrical appliances such as cameras, VCRs and camcorders.
  • Power source for battery-powered equipment.
Data Sheet Flyer Package Info. Mark Info. Quality Assurance Data
RP104x Series RP104x Series DFN(PLP)1010-4 RP104K Reliability
SOT-23-5 RP104N Reliability

All PDF files are less than 1MB unless otherwise stated.

Note : Discontinued Products
SC-82AB (RP104Q Series) are already discontinued. Providing only for the customer under present adoption with stock.

  • Buy Products / Order Sample


Ricoh semiconductor products are available at those dealers.


Page Top