800mA LDO REGULATOR
The R1170x Series are positive voltage regulator ICs by CMOS process. The R1170x Series have features of high ripple rejection, low dropout voltage, high output voltage accuracy, low consumption current. Each of these ICs consists of a voltage reference unit, an error amplifier, resistor net for setting output voltage, a current limit circuit at short mode, a chip enable circuit, and thermal-shunt circuit. Output Voltage of R1170 is fixed in the IC.
Low consumption current by the merit of CMOS process and built-in transistors with low ON-resistance make low dropout voltage and chip enable function prolong the battery life. These regulators are remarkable improvement on the current regulators in terms of ripple rejection, input transient response, and load transient response.
Maximum Output Current is large for its compact size.
Thus, the R1170x Series are suitable for various power sources for portable appliances.
Since the packages for these ICs are the SOT-89-5 package, HSON-6, or HSOP-6J, high density mounting of the ICs on boards is possible.
|Supply Current||Typ. 80µA|
|Standby Current||Typ. 0.1µA|
|Output Current||Min. 800mA (VIN=VOUT+1.0V)|
|Dropout Voltage||Typ. 0.12V (VOUT=3.0V, IOUT=300mA)|
|Output Voltage Accuracy||±2.0%|
|Temperature-drift Coefficient of Output Voltage||Typ. ±100ppm/°C|
|Line Regulation||Typ. 0.05%/V|
|Output Voltage||1.5V to 5.0V (0.1V steps)
(For other voltages, please refer to MARK INFORMATIONS.)
|Packages||HSON-6, SOT-89-5, HSOP-6J|
|Built-in Current Limit Circuit|
|Built-in Thermal Shuntdown Circuit|
|Ceramic capacitors are recommended to be used with this IC|
- ・Local Power source for Notebook PC.
- ・Local Power source for portable appliances, cameras, and videos.
- ・Local Power source for equipment of battery-use.
- ・Local Power source for home appliances.
|Data Sheet||Flyer||Package Info.||Mark Info.||Quality Assurance Data|
All PDF files are less than 1MB unless otherwise stated.
- Technical Support