STEP-UP DC/DC CONVERTER FOR OLED BACK LIGHT with SHUTDOWN FUNCTION
R1200x series are CMOS-based control type step-up DC/DC converter with low supply current ICs. Each of these ICs consists of a Nch MOSFET, NPN transistor, an oscillator, PWM comparator, a voltage reference unit, an error amplifier, a current limit circuit, an under voltage lockout circuit (UVLO), an over voltage protection circuit (OVP), and a soft start circuit. As the external components, an inductor, resistances or capacitors are necessary to make a constant output voltage of step-up DC/DC converter with the R1200x. At standby mode, the NPN transistor can separate the output from the input. During the situation of that, there are two versions.
R1200xxxxA: the output of VOUT is generated to 0V by the low resistance (with the auto discharge function).
R1200xxxxB does not generate the output of VOUT (without the auto discharge function).
The soft-start time (Typ. 1.5ms) and the maximum duty cycle (Typ. 91%) are set internally. For the protection functions of R1200x series are the current limit function of the LX peak current, the OVP function for detection the over voltage of output and the UVLO function for protective miss-operation by the low voltage. (The threshold of OVP is selectable from 17V, 19V or 21V.)
Since the packages for these ICs are DFN1616-6, DFN(PLP)1820-6, SOT-23-6 and WLCSP-6-P1, therefore high density mounting of the ICs on boards is possible.
|Supply Current||Typ. 500µA|
|Standby Current||Max. 3µA|
|Input Voltage Range||2.3V to 5.5V|
|Feedback Voltage||1.0V (Externally adjustable)|
|Feedback Voltage Accuracy||±1.5%|
|Temperature-Drift Coefficient of Feedback Voltage||±150ppm/°C|
|Oscillator Frequency||Typ. 1.2MHz|
|Maximum Duty Cycle||Typ. 91%|
|Switch ON Resistance||Typ. 1.35Ω|
|UVLO Detector Threshold||Typ. 2.0V|
|Soft-start Time||Typ. 1.5ms|
|Lx Current Limit Protection||Typ. 700mAv|
|OVP Detector Threshold||17V, 19V, 21V|
|Built-in a rectifier NPN transistor, at standby mode, complete shutdown is possible.|
|Built-in Auto discharge function||A version|
|Packages||DFN1616-6, DFN(PLP)1820-6, SOT-23-6,
|Ceramic capacitors are recommended||1µF|
- ・OLED power supply for portable equipment
- ・White LED Backlight for portable equipment
|Data Sheet||Flyer||Design Guide|
|Package Info.||Mark Info.||Quality Assurance Data|
All PDF files are less than 1MB unless otherwise stated.
WLCSP-6-P1 (R1200Z Series) are already discontinued. Providing only for the customer under present adoption with stock.