Skip to main content Skip to first level navigation

RICOH imagine. change.

RICOH ELECTRONIC DEVICES CO., LTD.

Skip to main content First level navigation Menu
Breadcrumbs
Main content

DC/DC Converter Application Note

Forced PWM Control

The general PWM control DC/DC converters may cause ringing in the Lx voltage because there is a zero current period to prevent a reverse coil current in low load condition. However the forced PWM control DC/DC converters do not cause ringing by forcing them into PWM control in low load condition.
Although the reverse coil current is present, the reverse current is not wasted because it flows to the output in the next cycle.

Forced PWM Control

Ricoh forced PWM control DC/DC converters are able to switch automatically between PWM and VFM mode. If one prefers that the supply current and efficiency are most important, please select automatic PWM/VFM switching mode. In that case the DC/DC converter operates in VFM mode during low load conditions. If one prefers that no ringing in low load condition should appear and operation with a constant frequency, please select fixed forced PWM control mode.

Forced PWM Control Available

Inquiry about products

Technical Support

Inquiries (SSL Form)

Inquiry about business

Purchase, Request for Samples and Documents

Distributors

Sample Online

Online Distributors