The RP200 Series are CMOS-based manual/automatic ECO mode shift LDO regulators featuring 300mA output. In auto switching mode, the operation can switch automatically to fast response mode or low power mode of the ECO function according to output current. (Automatic switching to fast response mode under IOUT>8mA conditions or to low power mode under IOUT<1mA conditions.)
In low power mode, supply current is as low as 1.5µA. In fast response mode, ripple rejection is 70dB and noise is low. By inputting control signal into the AE pin, the mode of the regulator can be fixed with fast response mode. In addition to SOT-23-5 package, a 0.69mm square WLCSP-4-P5 package and a 1.2mm square DFN(PLP)1212-6 are also available.
|Input Voltage Range (Absolute maximum rating)||1.4 V to 5.25 V (6.0 V)|
|Supply Current (Low power Mode)||Typ. 1.0 µA (VOUT ≤ 1.85V)|
|Supply Current (Fast Mode)||Typ. 55 µA|
|Supply Current (Standby Mode)||Typ. 0.1 µA|
|Ripple Rejection||Typ. 70 dB (f=1kHz)|
|Output Voltage Range||0.8V to 4.0V (0.1V steps)|
|Output Voltage Accuracy||± 1.0% (VOUT > 2.0V, Topt=25°C)|
|Temperature-Drift Coefficient of Output Voltage||Typ. ± 50 ppm/°C|
|Dropout Voltage||Typ. 0.23 V (IOUT=300mA, VOUT=2.8V)|
|Line Regulation||Typ. 0.02%/V|
|Packages||DFN(PLP)1212-6, SOT-23-5, WLCSP-4-P5|
|Built-in Fold Back Protection Circuit||Typ. 50 mA (Current at short mode)|
|Ceramic capacitors are recommended||1.0 µF|
RP200x261x Dropout Voltage vs. Output Current
The output voltage, auto discharge function, and package, etc. for the ICs can be selected at the user’s request.
|Product Name||Package||Quantity per Reel|
|Package *1||Marking||Reliability *2|
*1: The package file includes package dimensions, taping specifications, taping reels dimensions, power dissipations, and land pattern (foot pattern).
*2: Reliability file includes a reliability test report and a reflow profile.