The RP904 Series are CMOS-based step-down DCDC converters with Synchronous Rectifier featuring 1 A* output current and have through mode. RP904 includes an under-voltage lockout circuit (UVLO), a soft start circuit and a timer latch protection circuit. By simply using an inductor and capacitors as external components, a high-efficiency step-down DCDC converter can be easily configured. The output voltage of DCDC converter can be selected from 2 voltage by inputting signal to VSEL pin. The DCDC converter is PWM/VFM manual switching control. RP904 is able to select DCDC mode or through mode by inputting signal to BYPASS pin. WLCSP-11-P2 package is available.
*) This is an approximate value, because output current depending on conditions and external parts.
|Input Voltage Range (Maximum Rating)||2.5 V to 5.5 V (6.5V)|
|Standby Current||Typ. 435 µA (Through mode)
Typ. 410 µA (PWM mode, Non-switching)
Typ. 165 µA (VFM mode, Non-switching)
|Standby Current||Typ. 0.02 µA (VIN = 5.5 V, CE = "L")|
|Output Voltage Range||1.2 V ~ 3.3 V or 1.0 V ~ 1.5 V (0.1 V Steps)|
|Output Voltage Accuracy||±2%|
|Output Current||1 A|
|Oscillator Frequency||2 MHz|
|Oscillator Maximum Duty Cycle||Min. 100%|
|UVLO Detect Voltage||Typ. 2.25 V|
|Soft Start Time||Typ. 0.135 ms|
|Latch Protection Circuit||Delay time for protection Typ. 0.8 ms|
*) VSET = Set Output Voltage
Efficiency vs. Output Current
*) The VDD pins must be wired together when it is mounted on board.
In the RP904 Series, the output voltage, and the taping type for the ICs can be selected at the user's request.
|Product Name||Package||Quantity per Reel|
|Package *1||Marking||Reliability *2|
*1: The package file includes package dimensions, taping specifications, taping reels dimensions, power dissipations, and land pattern (foot pattern).
*2: Reliability file includes a reliability test report and a reflow profile.